10A VOLTAGE DROPPER

24V-12V TRANSFORMER DC

Load Current Continuous / Intermittent 6/10A Non-Isolated Common Negative

Input voltage range 17-32Vdc

Output voltage 13.6Vdc +15% -20% at extremes of temperature, load, input tolerance, etc

Intermittent output power As stated, taken for a maximum of 2 minutes followed by 8 minutes rest

Transient voltage protection Meets ISO7637-2 International standard for 24Vdc commercial vehicles

Electrostatic voltage protection Meets ISO10605, ISO14892, >8kV contact, 15kV discharge

Output noise <50mV pk-pk (100mV on 24V units) at continuous load. Meets CISPR25 and VDE0879-3

Off load current (quiescent current) <15mA

Power conversion efficiency Typically: 90% for non-isolated units, 85% for isolated units

Isolation >400Vrms between input, output and case, on isolated products only

Mean time between failures >162 years (HRD4)

Operating temperature -25ºC to +30ºC to meet this specification table +30ºC to +80ºC de rate linearly to 0A

Storage temperature -25ºC to +100ºC

Operating humidity 95% max., non-condensing

Casework Anodised aluminium, glass filled polycarbonate, dust water and impact resistance to IP533

Connections Four 6.3mm push-on flat blade connectors

Output indicator Green LED adjacent to output terminals

Mounting method ‘Click ‘n’ fit mounting clip, fitted separately using three hole fixing

Safe area protection: Over current Limited by current sensing circuit

Over heat Limited by temperature sensing circuit

Transients Protected by filters and rugged component selection

Catastrophic failure Protected by internal input and output fuses

Approvals 2004/108/EC The general EMC directive

2006/96/EC The automotive directive 93/68/EEC The CE marking directive

Markings CE and e marked

OEM SEealine