Calorifier 30l horizontal
These boilers are made of the finest quality materials, which guaranteeing the ultimate performance and reliability. In addition the drop coil technology and finned surface heat exchanger used in the boiler provides unrivaled heat recovery. The units also come in twin coil version for use with secondary water heaters.
The unit is quick and easy to install with full fitting instructions provided. The boiler is insulated in a polyurethane jacket which will retain the heat for up to 24 hours after the engine has been switched off. The boiler is made of 100% copper, this gives both performance and health benefits.
The calorifiers come completely assembled ready for quick and easy installation. The immersion, pressure release valve, barbed engine coil connections and stainless steel fixing brackets all come as standard. A thermostatic mixer valve is fitted as standard for the safety of those onboard and increases the volume of hot water available.The stored water within the boiler reaches the same temperature as the engine (generally 85°C). If the mixer valve is set at 65°C you will generally increase your available hot water supply by 25%.
Every calorifer is also individually bench tested ensuring quality and reliability every time. In house development and a commitment to customer service, quality and reliability allow us to provide boat builders with the exact shape and size of boiler to suit their space and application.
This calorifier comes complete with:
Thermostatic mixer valve
4 bar pressure release valve
1kw immersion heater
Non return valve
15mm barbed connections for coil, ready for 15mm push fit plastic plumbing
3 x stainless steel mounting feet
These are specially made for Sealine.
Lead time is around 8 days.
The unit is quick and easy to install with full fitting instructions provided. The boiler is insulated in a polyurethane jacket which will retain the heat for up to 24 hours after the engine has been switched off. The boiler is made of 100% copper, this gives both performance and health benefits.
The calorifiers come completely assembled ready for quick and easy installation. The immersion, pressure release valve, barbed engine coil connections and stainless steel fixing brackets all come as standard. A thermostatic mixer valve is fitted as standard for the safety of those onboard and increases the volume of hot water available.The stored water within the boiler reaches the same temperature as the engine (generally 85°C). If the mixer valve is set at 65°C you will generally increase your available hot water supply by 25%.
Every calorifer is also individually bench tested ensuring quality and reliability every time. In house development and a commitment to customer service, quality and reliability allow us to provide boat builders with the exact shape and size of boiler to suit their space and application.
This calorifier comes complete with:
Thermostatic mixer valve
4 bar pressure release valve
1kw immersion heater
Non return valve
15mm barbed connections for coil, ready for 15mm push fit plastic plumbing
3 x stainless steel mounting feet
These are specially made for Sealine.
Lead time is around 8 days.
PWKC14S
Product Code
New
Product Condition
Updating Order Details
Please do not refresh or navigate away from the page!
Details
Reviews
Featured Products
Wiper motor F42/5 2006 ..
£380.00
Wiper motor motor 20nm Right Hand. Fitted to F42/5 2006 owards OEM Sealine
Trim Tab Plate 240, S24..
£186.00
Trim tab plate to fit 240, S24, S23, S25 fitted with Eltrim trim tabs. Also fits other older models -...
Wiper motor F42/5 2006 ..
£380.00
Wiper motor motor 20nm Left Hand. Fitted to F42/5 2006 owards OEM Sealine
wiper motor f34 sc29 s29
£321.60
Wiper motor to fit F34 SC29 / S29 & some S38 OEM Sealine AFI 2.5" SHAFT WIPER MOTOR Replaces AFI2000...