These are a direct replacement for the standard 12" tubes fitted on all Sealines.
Effective Output Equivalent to Multiple Fluorescent Tubes.
Replace your dull 12" fluorescent light fitting tubes with a very long life and much brighter LED tube.
This LED tube lamp is designed and engineered to a marine quality specification and is, consequently, very much brighter than other products on the market.
When considering alternative products, check the lumen output of any 'similar' looking products, often they emit a much lower light output.
Our 300mm, 420-510 lumen lamps are constructed using 66 high quality Epistar SMD LEDs. Each LED lamp offers pretty much the effective light output of multiple fluorescent tubes, whist consuming less current than a single tube.
These lamps have a fourfold increased service life compared to fluorescent tubes and are completely flicker free in operation. Using much less power they are much more efficient and run much cooler.
The light output is UV free and unlike fluorescent lamps will not fade surfaces, furnishing fabrics or attract flying insects.
The lamp has built in Buck-Boost electronic 'Constant-Current' control circuit combining this with 66 high output SMD LEDs gives consistent light output over a wide range of input voltages (10-30V DC).
Retro fitting LED tubes to existing fittings enable the disconnection of the energy wasting and often noisy ballast contained in existing fluorescent fixtures. A simple wiring modification to existing fittings is required. This DIY operation is easily undertaken by most boat owners. Full instructions are issued with the lamp.
This lamp has an estimated service life of ~ 50,000 hours and will not cause interference to VHF or AIS signals.
The lamp is not polarity sensitive and can be connected without risk of damage.
- Voltage: 10-30V DC
- Input Power: 5W @ 12V DC
- Input Current: 416 mA
- Lumen Output: 420 lumens (WW) & 510 lumens (Daylight White)
- Beam Angle: 120°
- LED Service Life: ~50,000 hrs
- Dimensions: ~16mm diameter x 300mm length