16 product(s) found for "Gauges & Senders"
Analogue Shunt & Driver set
A solid state shunt for analogue gauges. Magnetic sensing system, and driving two different value meters from the same module. These units were fitted...
Black Waste tank level sender
Black Waste tank lever sender unit OEM Sealine
Plug & Cable assembly for waste tank sensor
3 pin water proof plug and cable (5m) assembly for the black waste tank sender unit. Image is for reference only.
Quick Anchor Chain Control Panel with Counter & On Boared Mounting Sensor
Windlass Control Panel w/Chain Counter Cutting edge technology and functionality. These are the characteristics that distinguish CHC 1202. A complete and...
Rudder position gauge
Rudder position gauge 12v OEM Sealine
Rudder position sender unit *no longer available8
Rudder position sender unit OEM Sealine
Rudder position sender unit T60
Rudder position sender unit for the T60 OEM Sealine
SC35 Digital DC Amp gauge
SC35 Digital DC amp gauge. OEM Sealine
Sealine Meter Ammeter Amp gauge 50 0 50
Ammeter -50 to +50 With Sealine logo This also replaces the -30 to +30 gauge which is no longer available. OEM Sealine
Sealine Meter volt gauge 8 - 18v
Volt Meter 12v Sealine printed on dial, OEM as used in Sealine domestic switch panels 0 - 18 volt Actual Meter: 75mm (widest points) x 58mm Bezel Width:...
Tank Sender unit water
Water tank probe. Can be trimmed to size OEM Sealine
VDO Fuel Tank Float Arm Sender Unit
Fuel Float Arm Sender. Bolt Circle Ø54mm. Adjustable 150 - 600mm OEM Sealine
VOLVO PENTA TACHO HOUR GAUGE REPAIR KIT LCD
Replacement LCD screen for the Volvo Penta analoge tacho with LCD hour readout. This is to replace the common problem of the lcd failing. Comes complete...
water level gauge
Water Level Gauge OEM Sealine
Wema large tank inspection flange
Simple and economical Inspection hatch 127mm diameter Requires 115mm ø hole in tank Nylon inspection hatch fitted to topside of tank. Hatch is secured...
Wema large tank inspection flange with sender hole
Large flange with sender hole. Wema number FLB-1 OEM Sealine
Shaver socket 12v - 240v
12V Converters. For electric shavers to be used in low voltage supply. Surface mounted. Supplied in white....
S34 Decal raised chrome
Raised chrome decal S34 OEM Sealine We have the full range usually in stock
Windlass Control Box Le..
Replacement reversing solenoid 12v for all Lewmar windlasses These have been made for us to replace the...
Bilge Pump 12v Attwood ..
Attwood Sahara 500 12v auto bilge pump as fitted to SC35 etc. Oem packaging 5 day lead time
Seaplex 9 pin sub D con..
Seaplex 9 pin connector to fit in Gewiss plates OEM Sealine